The actual user manual will inform you the answer, such as error codes 51, 43, 47, 12, ten, 3, and so forth. within the Windows Device Manager.
The actual user manual will tell you the error codes 51, 43, 47, 12, ten, 3, etc. Device manager and resolution in Windows;




error code
The meaning on the error code
resolution


Code 1
Device configuration is incorrect
Update device drivers


Code three
The device driver may well be broken, or the system's memory or other sources may be insufficient.
1; close some open applications. two; Uninstall the driver, then reinstall it. 3; install added RAM


Code 10
Device fails to start
Update device drivers


Code 12
The device cannot obtain enough free of charge sources to make use of
Disable conflicting devices


Code 14
The device is not going to operate appropriately until the personal computer is restarted
Restart your laptop


Code 16
Windows can not recognize all resources utilised by the device
Allocate other sources for the device


Code 18
Reinstall the device driver.
1; update the device driver. 2; uninstall and reinstall the driver


Code 19
Windows can not start off the hardware device for the reason that the configuration input inside the registry is incomplete or damaged
One; uninstall the driver and after that reinstall it. two; restore to the most profitable registry configuration


Code 21
Windows is removing the device
1; refresh the device manager view. two; restart your pc


Code 22
Device is disabled
Enable your device


Code 24
The device is missing or not functioning effectively, or all drivers aren't installed
A single; update the device driver. 2; delete device


Code 28
Device driver not installed
Set up device drivers


Code 29
The device is disabled because the device's firmware doesn't offer the necessary resources
Allow the device within the BIOS


Code 31
The device can't run usually because Windows cannot load the required drivers for the device
Update device drivers


Code 32
The device driver (service) is disabled. Option drivers could provide functionality
1; uninstall the driver after which reinstall it. 2; Adjust the startup form within the registry


Code 33
Windows cannot ascertain the sources needed by the device
Hardware configuration or replacement


Code 34
Windows can't verify device settings
Manually configure the device


Code 35
The computer's technique firmware contains insufficient intrusions to adequately configure and make use of the device.
Please speak to the laptop or computer manufacturer to update the BIOS.


Code 36
The device is requesting a pc interrupt, but it is configured to carry out an ISA interrupt (and vice versa)
Transform IRQ retention settings


Code 37
Windows can't initialize the device driver for the hardware
Uninstall and reinstall the driver


Code 38
Windows can not load the device driver for the hardware since the previous instance of your device driver continues to be in memory
A single; operation troubleshooting. two; restart your personal computer


Code 39
Windows cannot load device drivers for your hardware. The driver may possibly be damaged or missing.
Uninstall and reinstall the driver


Code 40
Windows can not access the hardware because the service key entry is missing or incorrectly written inside the registry
Uninstall and reinstall the driver


Code 41
Windows has successfully loaded the hardware device driver, but the hardware device cannot be located
One particular; update the device driver. 2; uninstall and reinstall the driver


Code 42
Windows can't load hardware device drivers mainly because duplicate devices are already running around the technique
Restart your pc


Code 43
Device stopped due to the fact Windows reported a problem
One particular; operation troubleshooting. 2; check your hardware documentation


Code 44
The application or service has shut down the hardware device
Restart your laptop or computer


Code 45
No hardware device is at the moment connected to the computer
Reconnect the device for the laptop or computer


Code 46
Windows cannot access the hardware device because the operating technique is shutting down.
No resolution essential


Code 47
Windows is ready to eliminate it safely, nevertheless it has not been removed in the computer, so you can not use the hardware device.
One particular; reconnect the device to the pc. 2; restart your computer


Code 48
At startup, the computer software of devices identified to have Windows problems is blocked.
Update sandisk data recovery is too huge for Windows to start a new hardware device (exceeding the registry size limit)
Take away devices that are no longer in use


Code 52
Windows can not verify the digital signature in the driver essential by the device
One; operation troubleshooting. two; Update device driver